FCC COMPLIANCE STATEMENTS
1. SYSTEM REQUIREMENTS
Hardware :
Notebook and desktop computer with IEEE-1394 port supported.
Operation system:
Win98/98SE, Win-Me, Win2000, Win XP, Mac OS 8.60 or above.
USER MANUAL
This equipment has been tested and found to comply with the limits for a Class Bdigitaldevice, pursuantto
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, there is no guarantee that
interference will not occur in a particular installation. If this equipment does causeharmful interferenceto
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
2. Drivers INSTALLATION
For Win98/98SE User
You can use 1394 externaldrive in Win98/98SE same as Win-me/2000/XPdirectly.You also can
upgrade the 1394 driver of win98/98SE from Microsoft web site by following steps.
Reorient or relocate the receiving antenna.
Increase the Distance between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
13 94 Extern a l Drive
. Sign on to the internet and go to the Windows 98 support web site:
. Locate the software upgrade search function, enter “1394”, then click [Search]
Step 1
Step 2
TRADEMARKS
Step 3. Related search results will appear on a new screen, and the first item should be
“wind...1394 storage...” which is the software you need to download. Please click on it.
Step 4. Please read the related information, then click on [NEXT]
MS-DOS, Windows, Windows 95/98/NT/2000/me/XPare trademarks ofMicrosoftCorporation.
Macintosh and Mac are trademarks of Apple Computer
*All of the third-party brands and names are the property of their respective owners.
LINDY No. 20689, 20674, 20695
Step 5. Finally, enter the download page. The language menu under the “LicenseAgreement” is
For Mac OS User
automatically set on English; please select another language, if you prefer.
You don’t need to install any drivers. When you finished the hardware installation ,
. After downloading has finished .Double-click the software to installupgrade program.
Step 7. After the software installed, restart your computer .The 1394 driver is updated.
External
Drive which just
Step 6
a new drive Disk is added on your desktop. it is the 1394
installed.
MAC OS User
When disconnecting your 1394 External Drive from computer, close all windows
and quit all running applications that are stored on the 1394 External Drive and drag
1394 External Drive’s icon into “Trash” to dismount it from the Desktop prior to
unplugging the 1394 External Drive from the 1394 port .
CAUTION !!
Do not plug out the 1394 External Drive from the 1394 port of your computer or
HUB while copying files to orfrom the device orwhile files orapplications stored
on the 1394 External Drive are in use.
4. Remove/Reject the Device
For Win-Me/2000/XP User
This 1394 External Drive is supported by Mass Storage Device in Win Me/2000/XP
system directly .You don’t need to install any drivers.
When you finished the hardware installation ,a green Unplug or Eject hardware icon
will appear in system tray.
Win 98/98SE User
Safety unplug 1394 plug from computer.
Win-me/2000/XP User
Double click on [My Computer], a new
Step 1. Right click the green arrow icon on system tray.
Step 2. Select Remove/Reject devices.
DOING SO MAY RESULT IN LOSS OF DATA.
External
drive Disk is added, it is the 1394
Drive which just installed.
Step 3. Highlight the [USB Mass Storage Device] in the dialog box, click on [Stop].
Step 4. Choice the 1394 External Drive that you want to disconnect, then click on
[Stop] again on next screen.
Step 5. Wait for few seconds, the system prompts “You may safely remove this
device” . Plug out the 1394 cable from the 1394 port of computer.
|